GE Moisture Target Series 6 User Manual page 67

3.6.2a Setting Fault Alarm Status
3.6.2b Setting the Fault Relay Type
For more information on the meaning of relay types, see section
Note:
2.6.4b Connecting the Fault Alarm on page 29.
Moisture Target Series 6 Hygrometer User's Manual
Chapter 3. Operation and Programming
To check the status of the fault alarm, from
the Fault Alarm menu, select Status and
press Enter
. The following screen
appears.
To change the status of the fault alarm, select
OFF or ON and press Enter
returns to the Fault Alarm menu.
To check and/or change the fault relay type,
select Type and press Enter
following screen appears.
To change the type of fault relay, select the
other option and press Enter
returns to the Fault Alarm menu.
. The screen
. The
. The screen
57