Alcatel-Lucent 1643 AMS Applications And Planning Manual page 99

Product description
Main
Board
Important! The power of the 1643 AM / 1643 AMS must be switched off before
the option card is inserted.
X4X.21 option card
The X4X.21 option card provides four additional X.21 2 Mbit/s interfaces.
The X4X.21 option card is plugged into the P1 connector as described in
without cover" (p.
Sub-D connectors.
It provides the following features:
• Four X.21 interfaces. The X.21 signals are bit-mapped into asynchronous 2 Mbit/s
PDH signals.
• Loopback of the external X.21 signals
• Support of LOS defect detection and AIS insertion as consequent action
• Support of re-timing via the X.21 2 Mbit/s
The following figure shows the block diagram of the X4X.21 option card.
...................................................................................................................................................................................................................................
365-312-801R7.2
Issue 3, May 2007
DS1
Interface
Circuit
P1
Connector
DS1
Interface
Circuit
4-3). The physical interfaces are realized as four 15-pin female
Alcatel-Lucent - Proprietary
DS1 Connector
DS1 Connector
Inventory
EEPROM
See notice on first page
DS1 Port
< TP 2.1 >
16 x
< TP 2.16 >
Power
Module
Option cards
"Front view
4-19