Alcatel-Lucent 1643 AMS Applications And Planning Manual page 171

Technical Specifications
Synchronization and timing
• Synchronization can be derived from the incoming STM-1 or STM-4 (1643 AM
only) aggregate signals
• Synchronization can be derived from the incoming STM-1 tributary signals (1643
AM STM-4 version only)
• The 1643 AMS supports synchronization derived from an incoming 2 Mbit/s (E1 or
DS1) data inputfrom the main board and option card
• Re-synchronization of the 2 Mbit/s ports is supported
• Support of SSM byte according to ETSI ETS 300 417-6
• External synchronization output at 2.048 MHz is according to G.703-10
(SYNC-OUT, SYNC-I/O) via RJ45 connector with an impedance of 120 Ω
symmetrical or with an impedance of 75 Ω
• Internal Clock in accordance with ITU-T G.813 option 1.
Overhead bytes processing
The next table shows the processing of SOH (Section OverHead):
Overhead bytes
A1-A2
J0
C1
B1
B2
D1 to D12
E2
F1
K1, K2 (bit 1 to 5)
K2 (bit 6 to 8)
S1
M1
Z1, Z2
...................................................................................................................................................................................................................................
365-312-801R7.2
Issue 3, May 2007
Function
Framing A1=11110110 (HF6)
Framing A2=00101000 (H28)
Regenerator section trace
identifier
Regenerator section trace
Trace/frame identifier
RS Bit error monitoring (BIP-8)
MS Bit error monitoring (BIP-8)
Data communication channel
(DCC) D1 to D3 or D4 to D12
can be selected
Codirectional interfaces at 64
kbit/s (J64), in accordance with
G.703 (Service channel)
64 kbit/s user channel
Automatic Protection Switching
(APS) channel for MSP
Remote alarm MS (MS-FERF)
Synchronization state
Remote error indication MS
(MS-REI)
Reserved
Alcatel-Lucent - Proprietary
See notice on first page
System specifications
Processing
Yes
Yes
Fixed to 00000001
Yes
Yes
D1-D3 fixed to
01010101 D4 to D12
used as DCC
Yes
Fixed to 11111111
Yes
Yes
Yes
Yes
Fixed to 11111111
10-11