Alcatel-Lucent 1643 AMS Applications And Planning Manual page 258

SHDSL Overview
Once the software is successfully downloaded, a reset command needs to be issued to
the SHDSL device in order to activate the new software image. Only one SW image
for an NTU can be stored in the NE of at most 2 Mbyte.
The 1643 AM / 1643 AMS supports the ITM-CIT and Lucent OMS to display a
dynamic software download progress indicator per module. This module also indicates
the software download percentage for the SHDSL module.
Configuration download
The NE keeps in its MIB a copy of all (managed) configurational settings related to
each attached SHDSL device. Upon user request these settings can be downloaded to
the target device, causing the device settings to be synchronized with the NE MIB.
Automatic download of the configuration happens after a power cycle of an SHDSL
device or after an interruption of the link. The NE detects in both cases the same
SHDSL device (same serial number etc.) to be present.
In case a new SHDSL device is detected on an LTU SHDSL port (i.e. different serial
number etc.), you will be notified by means of a "new device detected" alarm. You
then have the option to initiate a configuration download in order to download the
configuration of a previously connected SHDSL device to the new SHDSL device
(provided the new SHDSL device is of the same type).
....................................................................................................................................................................................................................................
12-12
Remote management and supervision of SHDSL devices
Alcatel-Lucent - Proprietary
See notice on first page
365-312-801R7.2
Issue 3, May 2007