Alcatel-Lucent 1643 AMS Applications And Planning Manual page 117

Operations, Administration, Maintenance and Provisioning
• The NE can store the 500 most recent alarm events and can be accessed by either
the local or remote monitoring stations
• Transmission failures are reported as defined in G.783 and ETS 300417
• Centralized supervision alarm system. The ITM-CIT informs of each new alarm
change for each accessible NE.
Software maintenance
Software maintenance includes the following:
• Local and remote software download via Lucent OMS or ITM-CIT, non-service
affecting. Minor LAN traffic interruption may occur in case of switch of the
software backup store in order to upgrade/downgrade the system.
• Faster MIB download duration. The ARC timer is set to five minutes. If a local
CIT or OMS connection is established within five minutes, the ARC process will
continue. If the local CIT or OMS confirms the MIB download within five
minutes, the 1643 AM / 1643 AMS will restart. However, if the MIB download is
not confirmed within five minutes, the 1643 AM / 1643 AMS opens the DCC
according to the parameters in the safeplace.
• The 1643 AM / 1643 AMS supports MIB upload and download functions to and
from a PC via the local Q-LAN interface. The MIB image can be saved as a binary
file. This feature is supported by the 1643 AM / 1643 AMS and the ITM-CIT.
The MIB image that is uploaded from the 1643 AM / 1643 AMS can be
downloaded via the Q-LAN interface to the other NEs with hardware variations.
For more information about the hardware variations, refer
(p.
• The 1643 AM / 1643 AMS NEQ value is 0.25 and is compatible with the
requirements of network management system.
• Database upload/download from the Lucent OMS.
• In-service database reprovisioning available via the local workstation running
ITM-CIT software.
• The 1643 AM / 1643 AMS supports the ITM-CIT and EMS to display a dynamic
software download progress indicator per module. This module also indicates the
software download percentage for the SHDSL module.
The "Fast download" tool permits to load the current software of the equipment via a
PC connected to the Q-LAN interface of the equipment.
Important! Please note that the SHDSL feature is realized differently in Release
6.1 and later versions than in the previous releases. Thus it cannot be upgraded to
Release 6.1 and later versions.
The following table describes the hardware variations that are available for MIB image
downloads.
MIB Upload/Download between
All NE item code with same item code
...................................................................................................................................................................................................................................
365-312-801R7.2
Issue 3, May 2007
5-3).
Alcatel-Lucent - Proprietary
See notice on first page
Operations Overview
"Software maintenance"
Network Element/port
Same AM1+ or AMS system
5-3