Alcatel-Lucent 1643 AMS Applications And Planning Manual page 237

Access multiplexer am / access multiplexer small ams(formerly metropolis am/ams. release 1.0 through 7.2
Hide thumbs Also See for 1643 AMS:
Table of Contents

Advertisement

Ethernet Overview
Traffic class to queue assignment
The assignment of the traffic classes to the egress queues is as follows:
Transparent tagging
Traffic class
3, and Internal
use
2
1
0
Notes:
1.
"Internal use" means that the queue is used for network management traffic (spanning
tree BPDU's or GVRP PDU's, for example).
Queueing
The egress treatment is the same for customer-role and network-role ports.
Every port has four associated egress queues. The queues 1 and 2 are to be used for
delay-insensitive traffic (for instance file transfer); the queues 3 and 4 are to be used
for delay-sensitive traffic (for instance voice or video).
Please refer to
traffic classes to the egress queues.
Repeater mode
In the repeater mode, there is no queueing process as described above. All frames go
through the same queue.
Scheduler
The preceding functional blocks assure that all packets are mapped into one of the
egress queues, and that no further packets need to be dropped.
The scheduler determines the order, in which packets from the four queues are
forwarded. The scheduler on each of the four queues can be in one of two operational
modes, strict priority or weighted bandwidth. Any combination of queues in either of
the two modes is allowed. When exactly one queue is in weighted bandwidth mode, it
is interpreted as a strict priority queue with the lowest priority.
Provided that Quality of Service - Classification, Queueing and Scheduling (QoS CQS,
cf.
"Quality of Service configuration options" (p.
scheduling method can be configured as follows:
....................................................................................................................................................................................................................................
365-312-801R7.2
Issue 3, May 2007
IEEE 802.1Q VLAN tagging and IEEE 802.1ad VLAN
tagging (provider bridge mode)
Queue
Traffic class
4
Internal use
3
3 (and 3 -)
2
2 (and 2-)
1
1 (and 1-) and 0 (and 0-)
"Traffic class to queue assignment" (p. 11-61)
Alcatel-Lucent - Proprietary
See notice on first page
Classification, queueing and scheduling
Queue
3
4
2
1
for the assignment of the
11-52)) is enabled, the queue
11-61

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1643 am

Table of Contents