Installation; Installation Preparation; Enclosure Options; Mounting Enclosure - Bosch D9412GV3 Installation Instructions Manual

4 en | Installation
1

Installation

1.1

Installation Preparation

This section contains a general installation procedure and refers to other sections of the
document for detailed instructions. Review this document and the D9412GV3/D7412GV3
Program Entry Guide (P/N: F01U170807) or D7212GV3 Program Entry Guide
(P/N: F01U170808) before beginning the installation to determine the hardware and wiring
requirements for the features used. Have the following documentation available when reading
through this guide:
–
–
–
1.2

Enclosure Options

Mount the control panel assembly in any of the Bosch Security Systems, Inc. enclosures
listed:
–
–
–
Refer to the D9412GV3/D7412GV3 Approved Applications Compliance Guide
(P/N: F01U143069) or D7212GV3 Approved Applications Compliance Guide (P/N: F01U143080)
to determine if the application requires a specific enclosure.
1.3

Mounting Enclosure

1.
2.
3.
NOTICE!
Electromagnetic interference (EMI) can cause problems on long wire runs.
F.01U.167.105 | 02 | 2010.11
D9412GV3/D7412GV3 Program Record Sheet (P/N: F01U170809) or D7212GV3 Program
Record Sheet (P/N: F01U170810)
Security System Owner's Manual (P/N: 71-06633-000) and GV3 Series Owner's Manual
Supplement (P/N: F01U143082)
Installation manual for keypad or annunciator (D1255 all models, D1255RB, D1256,
D1256RB, D1257, D1257RB, or D1260 all models)
D8103 Universal Enclosure (tan)
D8109 Fire Enclosure (red) for the D9412GV3 and D7412GV3 Control Panels
D8108A Attack Resistant Enclosure (tan)
Run the necessary wiring throughout the premises.
Mount the enclosure in the desired location. Use all five enclosure mounting holes. Refer
to Figure 1.1, Page 5.
Pull the wires into the enclosure.
UL Installation Instructions
Control Panels
Bosch Security Systems, Inc.