Rep 5.3 Dadf Registration And Scan Sensors - Xerox Phaser 3635MFP Service Manual

REP 5.3 DADF Registration and Scan Sensors

Parts List on PL 5.35
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Before performing this procedure, refer to
1. Remove the DADF, PL 5.10 Item 1.
2. Remove the DADF rear cover, PL 5.10 Item
3. Remove the DADF door assembly, PL 5.10 Item
4. Release the DADF feed assembly, PL 5.10 Item
NOTE: It is not necessary to disconnect the harness from the DADF feed assembly.
5. Remove the DADF transport assembly upper cover,
6. Remove the DADF registration sensor or scan sensor as necessary,
DADF scan sensor
DADF registration sensor
Figure 1 Sensor location
Replacement
1. Replacement is the reverse of the removal procedure.
Repairs and Adjustments
REP 5.3, REP 5.4
CAUTION
GP 10 General Disassembly Precautions.
9.
3.
4.
PL 5.35 Item 13.
Figure 1.
REP 5.4 DADF Transport Assembly and DADF Feed
Assembly
Parts List on PL 5.30 and
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Take care during this procedure. Sharp edges may be present that can cause injury.
Before performing this procedure, refer to
1. Remove the DADF, PL 5.10 Item
2. Remove the DADF rear cover,
3. Remove the DADF front cover,
4. Remove the DADF door assembly,
5. Remove the DADF lift solenoid,
6. Disconnect the following connectors from the
• CN1
• CN5
• CN7
• CN8
• CN9
April 2010
4-14
PL 5.35
WARNING
WARNING
CAUTION
GP 10 General Disassembly Precautions.
1.
PL 5.10 Item 9.
PL 5.10 Item 10.
PL 5.10 Item 3.
REP 5.2.
DADF PWB:
Phaser 3635MFP/WorkCentre 3550