Rep 5.7 Pickup Assembly - Xerox Phaser 3635MFP Service Manual

REP 5.7 Pickup Assembly

Parts List on PL 5.25
Removal
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Before performing this procedure, refer to
1. Remove the DADF, PL 5.10 Item 1.
2. Remove the DADF door assembly, PL 5.10 Item
3. Release the pickup spring PL 5.25 Item
4. Remove the pickup assembly, Figure
2
Carefully unclip the pickup assem-
bly from the DADF door assembly
Figure 1 Pickup assembly removal
Repairs and Adjustments
REP 5.7
CAUTION
GP 10 General Disassembly Precautions.
3.
7.
1.
1
Rotate the locking collars into the
vertical position
Replacement
1. Ensure that the pickup assembly is correctly installed into the DADF door assembly,
ure 2.
1
When installing the pickup assembly
ensure that the peg is correctly located
under the lever
Figure 2 Correct installation
2. Replacement is the reverse of the removal procedure.
April 2010
4-18
Fig-
Lever attached to document gate
Pickup assembly
Phaser 3635MFP/WorkCentre 3550