IDC 255 Progate Drive Thru Service Manual
I
C
R
CE
HUTE
EMOVAL
1. Remove 4 nuts attaching ice chute to hopper.
2. Disconnect ice chute switch harness located behind the control box.
Figure 24.
3. Pull assembly away form hopper. Do not loose
or damage gasket. If damaged or missing
replace.
4. Pull ice chute assembly out of splash panel
and disconnect the CO2 lines.
NOTE: Mark the CO2 lines to avoid improper
assembly.
5. View of underside of ice chute assembly show-
ing gate and pneumatic cylinder.
Publication Number: 621057419SER
- 24 -
Figure 23.
Figure 25.
Figure 26.
Figure 27.
© 2006-2013, IMI Cornelius Inc.