Trane Performance Climate Changer Installation, Operation And Maintenance Manual page 49

4. Lift the secondary unit, following instructions in
Figure 33. Place secondary unit on black unit support brackets.
5. Install screws as shown in
Figure 34. Install screws using powered impact gun.
6. Remove the secondary unit lifting lugs one at a time and reinstall screws after sections are set
CLCH-SVX07C-EN
(see Figure 6), and place on the black unit support brackets (see
must be centered on the primary unit between the black unit support brackets.
gun and taking care not to strip the screws.
X25240049010
Screw: 0.313-18 x 0.875 in.
Sheet metal hex head
in final position.
"General Lifting Considerations" on page 25
Center of units
Figure 34 inserting the appropriate screws using a powered impact
Installation - Mechanical
Figure 33). The secondary unit
Secondary Unit
Gasket
Primary Unit
Airflow
45