Trane Performance Climate Changer Installation, Operation And Maintenance Manual page 41

11. For sizes 66-120 only, bolt through the wedge blocks using a ½-threaded rod (see
Figure 25. Wedge block attachment used for sizes 66-120 only
Rod
0.500-13 x 10.50 thd
0.500-13 x 10-in hex
fully threaded zinc plated
12. Use straps and come-alongs to compress the gasketing and pull the sections together along the
CLCH-SVX07C-EN
Alternate between tightening on the lifting lug bolts and wedge block bolts until the shipping
section comes together.
Wedge block
Bolt
machine bolt
Washer
0.656 id x 0.312 od
height of the unit.
Washer
0.656 id x 1.312 od
Nut
0.500-13 hex mach
Lifting lugs
Installation - Mechanical
Figure
Nut
0.500-13 hex flange (HW)
25).
37