14. For stacked units, remove top level lifting lugs one at a time and replace with factory-provided
Figure 27. Stacked unit hardware
X25020634020
Screw: #10-16X 0.75 in.
Sheet Metal Hex Head
Qty:3
CLCH-SVX07C-EN
stacking brackets at each shipping split corner and end of unit perpendicular to airflow after
sections are set in final position (see
a good air seal between the upper and lower sections.
X25240049010
Screw: .313-18X0.875 in.
Sheet Metal Hex Head
Qty: 4
Figure
27). Be sure to compress the gasketing to ensure
Installation - Mechanical
39