Related Manuals - Omron R88M-1L Series Startup Manual

Related Manuals

The following manuals are related. Use these manuals for reference.
Manual name
Sysmac Studio Version 1
Operation Manual
Sysmac Studio Drive
Functions Operation
Manual
NJ-series CPU Unit
Hardware User´s Manual
NJ/NX-series CPU Unit
Software User's Manual
NJ/NX-series CPU Unit
Motion Control User's
Manual
NJ/NX-series Instructions
Reference Manual
Cat. No. Model
W504 SYSMAC-SE2□□□
I589-E1 SYSMAC-SE2□□□
W500 NJ501-□□□□
NJ301-□□□□
W501 NJ501-□□□□
NJ301-□□□□
W507 NJ501-□□□□
NJ301-□□□□
NJ101-□□□□
W502 NJ501-□□□□
NJ301-□□□□
Application
Learning about the operating
procedures and functions of
the Sysmac Studio.
Learning about the operating
procedures and functions of
the Sysmac Studio for Drives
Learning the basic
specifications of the
NJ-series CPU Units,
including introductory
information, designing,
installation, and
maintenance.
Mainly hardware information
is provided.
Learning how to program and
set up an NJ/NX-series CPU
Unit.
Mainly software information is
provided.
Learning about motion
control settings and
programming concepts.
Learning detailed
specifications on the basic
instructions of an
NJ/NX-series CPU Unit.
Description
Describes the operating procedures of
the Sysmac Studio.
Describes the operating procedures of
the Sysmac Studio to setup Drives
Provides an introduction to the entire
NJ-series system along with the
following information on the CPU Unit.
• Features and system configuration
•
Overview
•
Part names and functions
• General specifications
• Installation and wiring
•
Maintenance and inspection
Use this manual together with the
NJ/NX-series CPU Unit Software
User's Manual (Cat. No. W501).
Provides the following information on a
Controller built with an NJ/NX-series
CPU Unit.
• CPU Unit operation
•
CPU Unit features
•
Initial settings
• Language specifications and
programming based on IEC 61131-3
Use this manual together with the
NJ-series CPU Unit Hardware User's
Manual (Cat. No. W500).
Describes the settings and operation of
the CPU Unit and programming
concepts for motion control.
When programming, use this manual
together with the NJ-series CPU Unit
Hardware User's Manual (Cat. No.
W500) and NJ/NX-series CPU Unit
Software User's Manual (Cat. No.
W501).
Describes the instructions in the
instruction set (IEC 61131-3
specifications).
When programming, use this manual
together with the NJ-series CPU Unit
Hardware User's Manual (Cat. No.
W500) and NJ/NX-series CPU Unit
Software User's Manual (Cat. No.
W501).
7