Advanced Settings/Call Features - Grandstream Networks GXV3240 Administration Manual

Advanced Settings/Call Features

Always Ring Speaker
Virtual Account Group
Avaya Mode
Virtual Account Group
Concurrence Register
Auto Conference
Display Soft Keyboard
Always Display Dialer
Interface
Dialer Interface
Display Interval (m)
Filter Characters
Determines if the speaker will play the ringtone if the speaker channel is
not set as default channel. If set to "Yes", the phone will force to play the
ring speaker in speaker channel. The default setting is "No". End user might
need this feature when the headset is connected.
Combines the first three accounts as a virtual group to place and answer
calls. This feature is designed for the Avaya customer.
Configures the amount of concurrent accounts in virtual account group. If
the total amount of virtual group accounts is "N", the number of accounts
the user sets is "N", then the phone will register the first n accounts.
Allows the phone system to invite all call parties into a conference by
pressing the CONF key. If it is disabled, the end user has to add each call
party to conference manually. The default setting is "No".
Enables the QWERTY soft keyboard in the phone app/dialer page. If it is
set to "Yes", the soft keyboard will pop up by tapping the input box. Default
setting is "No". It is recommended to disable the dial plan of the dial page
on the Account Settings page, or the call may fail if dial characters not
conform to the dial plan.
Forces the phone system to enter the dialer page on the LCD screen. If it
is enabled, the phone LCD will display the dialer interface automatically
from LCD screen idle mode (screen saver mode or screen sleep mode). It
needs coordinate with Dialer Interface Display Interval setting. The default
setting is "No".
Configures the timer for the Dialer Interface Priority Display. The timer will
be started from the LCD screen goes to idle mode (screen saver mode or
screen sleep mode). If the Dialer Interface Priority Display feature is
enabled, the phone LCD will display the dialer interface automatically from
LCD screen idle mode (screen saver mode or screen sleep mode) after the
timer expired. If it is configured with 0, the phone LCD screen will display
the dialer interface when user wakes up the phone from the screensaver
mode or screen sleep mode whatever the last apps is running. It needs
coordinate with Dialer Interface Display. The default setting is 1.
Sets the characters for filter when dial out numbers. Users could set up
multiple characters. For example, if set to "[()- ]", when dial (0571)-8800-
8888, the character "()-" will be automatically filtered and dial
057188008888 directly.
Note: The space also can be used and it will be automatically filtered. The
default value is "[()- ]".
GXV3240 Administration Guide
Version 1.0.3.207
P a g e |
69