Grandstream Networks GXV3240 Administration Manual page 86

PnP(3CX) Auto
Provision
Automatic Upgrade
Enable Randomized
Automatic Upgrade
Automatic Upgrade
Check Interval (m)
Hour of the Day (0-23)
Day of the Week (0-6)
Firmware Upgrade and
Provisioning
Disable SIP NOTIFY
Authentication
Auto Reboot to Upgrade
Without Prompt
Sets the phone system to broadcast the SIP SUBSCRIBE message during
booting up to allow itself to be discovered and be configured by the SIP
platform. The default setting is "Yes".
Specifies when the firmware upgrade process will be initiated; there are 4
options. The default setting is "No".
• No: The phone will only do upgrade once at boot up.
• Check every X minutes: User needs to specify a period in minutes.
• Check every day: User needs to specify "Hour of the day (0-23)".
• Check every week: User needs to specify "Hour of the day (0-23)"
and "Day of the week (0-6)".
• Check at a period Time: User needs to specify "Hour of the day
(0-23)"
Note: Day of week is starting from Sunday. The default setting is No.
Configures how the GXV3240 will check the server for new firmware and
configuration file downloading. It only valid if the user selects "Check at a
period of time" in the "Automatic Upgrade". If enabled, GXV3240 upgrade
automatically at random time point in the setting period. This option is
mainly used for multiple devices upgrade at the same time
Configures how the phone system will check the server for new firmware
and configuration file downloading. It only valid if the user selects "Check
at a period of time" in the "Automatic Upgrade".
The default setting is 10080 (namely 7 days).
Defines at which hour of the day they phone system will check the
HTTP/HTTPS/TFTP server for firmware upgrades or configuration files
changes.
Defines which day of the week the phone system will check the
HTTP/HTTPS/TFTP server for firmware upgrades or configuration files
changes.
Defines the phone system's rules for automatic upgrade. It can be selected
from:
•
Always Check at bootup
•
Always Check at bootup, when F/W pre/suffix changes,
•
Skip the Firmware Check.
The default setting is "Always Check at bootup".
Disables the SIP NOTIFY Authentication on the phone. If set to "Yes", the
phone will not challenge NOTIFY with 401. The default setting is "No".
Configures the phone system to pop up a notification message before
upgrading new firmware. If set to "Yes", the phone will automatically start
upgrading after downloading the firmware file. Otherwise, users would
need to confirm in the prompted message on the LCD screen to start
upgrading process. The default setting is "Yes".
GXV3240 Administration Guide
Version 1.0.3.207
P a g e |
86