Grandstream Networks GXV3240 Administration Manual page 70

Disable Call-Waiting
Disable Call-Waiting
Tone
Disable DND Reminder
Ring
Disable Direct IP Call
Use Quick IP-Call
mode
Disable Video Call
Feature
Disable Conference
Disable Transfer
Hold Call Before
Completing Transfer
Default Transfer Mode
In-Call Dial Number on
Pressing Transfer Key
Disable Active MPK
Disables the call waiting feature. If it is checked, the phone system will
reject the second incoming call during an active session without user's
knowledge. But this missed call record will be saved to remind users. The
default setting is "No".
Sets the phone system to play the call waiting tone if there is another
incoming call. If it is set to "Yes", the phone will only display the indicator
on the LCD screen for another incoming call. The default setting is "No".
Configures the phone to play the DND reminder ringtone for the incoming
call if the DND feature is enabled.
If it set to "Yes", the phone will keep mute instead of playing a ring splash
to indicate an incoming call when DND is enabled. Default is "No".
Configures the phone system to allows the end users to make an outbound
IP call. If it is set to "Yes", the phone will hide the IP call feature and end
users will not be allowed to make an outbound IP call. The default is "No".
Sets the phone to automatically fills in the first three octets to make an
outbound IP call. If set to "Yes", users can dial an IP address under the
same LAN/VPN segment by entering the last octet in the IP address. To
dial quick IP call, off-hook the phone and dial #XXX (X is 0-9 and XXX
<=255), the phone will make direct IP call to aaa.bbb.ccc.XXX where
aaa.bbb.ccc comes from the local IP address regardless of subnet mask.
#XX or #X are also valid so leading 0 is not required. No SIP server is
required to make quick IP call. The default setting is "No".
Disables the video call feature on GXV32xx. The default setting is "No".
Disables the conference. When set to "Yes", the phone will block the
conference application. The default setting is "No".
Disables the transfer feature. When set to "Yes", the phone system will
block the TRANSFER key on the LCD screen. The default setting is "No".
When this option is set to "Yes" the phone holds the second call before
completing the attended transfer (it sends the INVITE method to hold the
call before sending the REFER method).
Sets the default transfer mode for the phone system. If the Blind Transfer,
Attended Transfer or Attended Transfer Only mode is set, the phone system
will use the specific mode to transfer an active call. The users still have
privilege to switch the mode on the LCD screen when they tap the transfer
key. The default setting is "Blind Transfer".
Configures the code to be sent as DTMF when pressing transfer button.
Once enabled, when MPK users receiving an incoming call, the extension
board will jump to call page to display all incoming calls. Default is "No"
GXV3240 Administration Guide
Version 1.0.3.207
P a g e |
70