Headset Key Mode
Handset TX Gain (dB)
Handset RX Gain (dB)
Virtual Sound Card TX
gain(dB)
Defines Headset key mode when headset is connected to the phone; users
could use the HEADSET button in two different modes:
1. Default Mode
•
When the phone is in idle, press HEADSET button to off-hook the
phone and make calls by using headset. Headset icon will display
on the top of the call screen in dialing/talking status;
•
When there is an incoming call, press HEADSET button to pick the
call by using headset;
•
When there is an active call using headset, press HEADSET
button to hang up the call;
•
When Speaker/Handset is used in dialing/talking status, press
HEADSET button to switch to headset. Press it again to hang up
the call, or press Speaker/Handset to switch back to previous
mode.
2. Toggle Headset/Speaker
•
When the phone is in idle, press HEADSET button to switch to
Headset mode. The idle screen will display a Headset icon. In this
mode, if pressing Speaker button or entering digits, headset will
be used by default;
•
When there is an incoming call, press Answer icon on the screen
or Speaker button, headset will be used;
•
When there is an active call, press HEADSET button to toggle
between Headset and Speaker.
Configures the transmission gain of the handset.
•
0
•
-6
•
+6
The default setting is "-6dB".
Configures the handset volume, thus controls the received audio signal.
Note:
When set to +6dB, the increasing handset volume may cause irreversible
damage to the hearing, please proceed with caution.
•
0
•
-6
•
+6
The default setting is "0dB".
Configures the transmission gain of the virtual sound card, it can be
selected from the dropdown list:
GXV3240 Administration Guide
Version 1.0.3.207
P a g e
|
98