Grandstream Networks GXV3240 Administration Manual page 79

Address Type
IP Address
Subnet Mask
Default Gateway
DNS Server 1
DNS Server 2
Alternate DNS Server
Second Alternate DNS
Server
Show IP Address On
Account Widget
Enable LLDP
LLDP TX Inter
Enable CDP
Layer 3 QoS for SIP
Layer 3 QoS for Audio
Layer 3 QoS for Video
Layer 2 QoS
802.1Q/VLAN Tag
(Ethernet)
Layer 2 QoS 802.1p
Priority Value (Ethernet)
Layer 2 QoS
802.1Q/VLAN Tag (Wi-Fi)
Layer 2 QoS 802.1p
Priority Value (Wi-Fi)
When different networks for data and VoIP calls is selected, set the
address type for the VoIP calls, users can either select DHCP or Static IP.
Enter the IP address when static IP is used.
Enter the Subnet Mask when static IP is used.
Enter the Default Gateway when static IP is used.
Enter the DNS Server 1 when static IP is used.
Enter the DNS Server 1 when static IP is used.
Defines the secondary DNS IP address if the static IP is used.
Configures the secondary alternate DNS IP address to failover during both
the default DNS server and alternate DNS server's outage.
Shows IP address of the phone on desktop account widget. The default
setting is "Yes".
Enables the LLDP (Link Layer Discovery Protocol) feature on the phone
system. If set to "Yes", the phone system will broadcast LLDP PDU to
advertise its identity and capabilities and receive same from a physical
adjacent layer 2 peer. The default setting is "Yes".
Configures the interval the phone sends LLDP-MED packet. Default setting
is 30s.
Configures whether to enable CDP to receive and/or transmit information
from/to CDP-enabled devices. The default setting is "No".
Defines the Layer 3 packet's QoS parameter for SIP messages in decimal
pattern. This value is used for IP Precedence, Diff-Serv or MPLS. The
default setting is 48 which is equivalent to the DSCP name constant CS6.
Defines the Layer 3 packet's QoS parameter for RTP messages in decimal
pattern. This value is used for IP Precedence, Diff-Serv or MPLS. The
default setting is 48 which is equivalent to the DSCP name constant CS6.
Defines the Layer 3 packet's QoS parameters for H.264 messages in
decimal pattern.
This value is used for IP Precedence, Diff-Serv or MPLS. The default
setting is 48 which is equivalent to the DSCP name constant CS6.
Assigns the VLAN Tag of the Layer 2 QoS packets for Ethernet.
The Default value is 0.
Assigns the priority value of the Layer 2 QoS packets for Ethernet.
The Default value is 0.
Assigns the VLAN Tag of the Layer 2 QoS packets for Wi-Fi.
The Default value is 0.
Assigns the priority value of the Layer 2 QoS packets for Wi-Fi.
The Default value is 0.
GXV3240 Administration Guide
Version 1.0.3.207
P a g e |
79