Grandstream Networks GXV3240 Administration Manual page 64

Ring Timeout (s)
Virtual Account Group
Transfer on 3-way
Conference Hang up
Use # as Dial Key
DND Call Feature On
DND Call Feature Off
Conference URI
BroadSoft Call Center
Hoteling Event
Call Center Status
Defines the expiration timer (in seconds) for the rings with no answer. The
default setting is 60. The valid range is from 10 to 300.
Categorizes accounts in server mode groups, the accounts in the same
group will be combined as one and the account widget will display the Caller
ID in the account with lowest ID. The phone can answer any incoming calls
to each account in groups.
If user makes an outbound call, the phone system will use the lowest ID
account by default. If the account fails or SIP INVITE message is timeout,
the phone system will failover to the next account in the group with higher
account ID. If all the accounts are not available in the group, the phone
system will traverse all the accounts in the group and notify the end users
the session is failed.
Transfers conference from hosted party when hang up, thus other parties
can continue the conference without interruption. The default setting is
unchecked.
Treats "#" as the "Send" (or "Dial") key when set to "Yes". If set to "No", this
"#" key can be included as part of the dialed number or it will be used as
redial key when the input area has no number (please make sure the dial
plan is properly configured to allow dialing # out). Default setting is "Yes".
Configures the feature code to enable the DND (Do Not Disturb) feature for
this account.
If it is configured, the phone will dial the feature code automatically when
the DND feature is enabled.
Configures the feature code to disable the DND (Do Not Disturb) feature for
this account. If it is configured, the phone will dial the feature code
automatically when the DND feature is disabled.
Configures the network based conference URI (the BroadSoft Standard). If
it is configured, end user needs to tap the N-way key during the conference
to transfer the host to the remote media server.
Enables the BroadSoft Call center feature for this account. If set to "Yes",
the soft key "CallCenter" is displayed on LCD dial screen for the BroadSoft
account. User can access different BroadSoft Call Center agent features
via this softkey. Please note that "Feature Key Synchronization" will be
enabled regardless of this setting. The default setting is "No".
Enables or disables the BroadSoft Hoteling event feature. It must turn on
the BroadSoft call center feature before enabling this feature.
With "Hoteling Event" enabled, user can access the Hoteling feature option
by tapping the "Call Center" key in the Phone app. Default setting is "No".
Obtains the BroadSoft Call center status, when set to "Yes", the phone will
send SIP SUBSCRIBE message to the server to get call center status. It
GXV3240 Administration Guide
Version 1.0.3.207
P a g e |
64