Texas Instruments TMS320 User Manual page 67

3.2.2 Raw Logs
By default, the Raw Logs tool displays complete unformatted log data. The
default columns displayed are: time, seqID, arg1...arg4, and formattedMsg.
You can open this tool by choosing Tools > RTA > Raw Logs from the
CCStudio menu bar.
This table displays all the log records that have been sent from the target.
This contains all the records used by the RTA tools to populate their graphs
and tables. In addition, the following types of logs are also shown:
❏ Any implicit LOG messages from other modules
❏ Any user-defined LOGs or LOG_printf() calls
This tool contains the following toolbar icons:
Toggle view with group setting on and off. (Shift+G)
Open the Find In dialog for searching this log.
Open the Set Filter Expression dialog for filtering the log records to
match a pattern.
Pause data updates from the target. This is useful when you are using
the Find or Filter dialogs. (Shift+F5)
Automatically fit the columns to their current contents.
Refresh data from the target. This is useful if you have stopped data
streaming or paused updates.
Toggle data streaming from the target on or off. The default is on.
Grouping in the RTA views refers to synchronizing the views so that moving
around in one view causes similar movement to happen automatically in
another. For example, if you group the CPU load graph with Raw Logs, then
if you click on the CPU Load graph, the Raw Log displays the closest record
to where you clicked in the graph.
Real-Time Analysis Tools in CCStudio v4.x
Instrumentation 3-5