Commissioning; Switching On The Monitor And Video Source; Avoiding Image Sticking - Eizo CuratOR LX491W Instructions For Use Manual

6 Commissioning

Note
Factory settings
All monitors are optimally preset in the factory, such that changes are not usually required.

6.1 Switching on the monitor and video source

Note
To obtain the best possible results, the video source should support communication via the
Display Data Channel (DDC).
The monitor and video source can be switched on in any order.
Switch on
• Switch on the monitor.
– The EIZO logo appears briefly.
• Switch on the video source.
– If there is no signal the monitor displays a black screen.
– If there is a signal, the image is displayed accordingly.
Note
Image not displayed?
If an image is not displayed after the monitor is switched on and a video signal is present:
• check the system for basic connection and operating errors before contacting service
personnel.

6.2 Avoiding image sticking

Image sticking may occur with LCD monitors. Image sticking is an effect whereby a faint im-
age of the previous screen contents can be seen after the display contents have changed.
The following measures can reduce or prevent image sticking:
• Use a screen saver with regularly changing images
• Switch off the monitor when it is no longer needed.
• The monitor has an energy saving mode:
If the application in use supports the energy saving mode, activate it.
CuratOR LX491W
Instructions for Use, 02/2018
6.1 Switching on the monitor and video source
Commissioning
23