Eizo CuratOR LX491W Instructions For Use Manual page 20

Connecting
5.3 Connection panel
Signal inputs
The following signal inputs are available on the connection panel.
• VGA input (15-pin D-sub socket): In addition to a standard VGA signal, other analog sig-
nals can be connected with a suitable adapter. Examples include component, composite,
and RGB video using a multi-BNC to VGA adapter.
• DVI-I and DVI-D input
• 3G-SDI (BNC)
• S video with Y/C signal (4-pin mini-DIN socket)
• Composite (BNC)
Note
Interlaced signals
If an interlaced signal is applied to a signal input (except for the 3G-SDI input) and the
"Deinterlacing" function in the "Signal" OSD menu is set to "Normal", brightness is reduced
by approx. 15%.
The "Field to frame" and "Static mesh" deinterlacing settings cause a slight reduction in
brightness only, but can lead to comb effects.
Also refer to the "Deinterlacing" function in the
Signal outputs
The following signal outputs are available on the connection panel.
• VGA output (15-pin D-sub socket):
• 3G-SDI (BNC)
• S video with Y/C signal (4-pin mini-DIN socket)
• Composite (BNC)
Additional connectors
• Power connector (appliance plug)
• USB: 2 downstream (type A) and 1 upstream (type B) connector.
• Voltage supply: 5V/1A connector to supply external devices.
20
"Signal" menu [} 41].
Instructions for Use, 02/2018
CuratOR LX491W