Craftsman 113.197511 Owner's Manual page 17

Assembly
8. Pull foot lever forward until smooth
pin sits in groove of foot box. Attach pin
retainer to rear of foot box: use two
screws (insert screws through two smaller
holes of retainer; make sure smaller holes"
are on top).
Small Holes
On Top
Smooth Pin
In Groove
9. Screw nut to within v2" of bottom of
leveling foot. Screw leveling foot into rod
until nut meets foot box. This completes
left foot assembly.
10. Repeat steps to build right foot as-
sembly. Begin with closed side of foot
box to your right (step 2). Have lever
point toward right (step 6).
Attach Foot Assemblies
1. Set out:
-right side panel
-left side panel
-four v4" diam x 7/16"long slotted screws.
2. Push foot lever on right foot assembly
down into lower opening of "C" to lock
foot assembly.
!
Lever Locked
Down
Right Foot
Assembly
17