Craftsman 113.197511 Owner's Manual page 15

Assembly
8. Put corner bracket in each corner, so
edges point up. Attach brackets to long
sides of shelf: use two screws per bracket
(insert screws through shelf); on end of
each screw put washer, then nut, and
wrench tighten. Note: Screws for short
sides wilt be in,_tatted later.
Attach Casters (Only Models with
Casters; Door Model without Casters:
Go to "Assemble Side Panels")
1. Set out:
-four casters
-sixteen v4" diam x v2"long truss head
screws
-sixteen v'4"diam lock washers
-sixteen v_" diam hex nuts.
2. Attach one caster to each corner brack-
et: use four screws per caster (bzsert
screws through shelf); on end of each
screw put washer, then nut, and wrench
tighten.
\
Long End of Shelf
._,.,_ Long End of Shelf
Corner Bracket
Build Foot Assemblies
1. Set out:
-two foot boxes
-two foot levers
-two foot rods
-two pin retainers
-two grooved pins
-two smooth pins
-two washers
-two springs
-two leveling feet
-t'our # 10 x _/_"long pan head screws
-two _/s" diam hex nuts.
!5