Table of Contents
Advertisement
Controls &
Components
To reduce your risk of
serious injury, read this
entire
using machine.
Refer to the following figures and descriptions to
become familiar with the basic controls and com-
ponents of this machine. Understanding these
items and how they work will help you understand
the rest of the manual and minimize your risk of
injury when operating this machine.
DRO & Control Panel
Become familiar with the operation of the DRO
and control panel before operating the Model
G0836 (see Figure 1).
A
B
C
D
E
F
G
Figure 1. G0836 DRO and control panel.
-4-
manual
BEFORE
M
L
K
J
I
H
A. DRO Display: Shows location and move-
ment of table and headstock along X-, Y-,
and Z-axis to within 0.0001" or 0.0001mm.
Measurements can be recorded starting any-
where along axis movement.
B.
. Press to select Y-Axis, and scrolls
screen left.
C.
. Press to select X-Axis, and scrolls
screen up.
D.
. Press to select Z-Axis, and scrolls
screen down.
E. Spindle Speed Tachometer: Shows spindle
from 0–2000 RPM.
F.
Spindle Speed Dial: Rotate to turn spindle
ON and OFF; varies spindle speed from 100–
2000 RPM; resets machine FAULT mode
when turned OFF.
G. FWD-REV Switch: Turn to FWD (1) to rotate
spindle clockwise. Turn to REV (2) to rotate
spindle counterclockwise. Turn to OFF (0) to
stop spindle.
H. E-Stop Button: Press to stop spindle rota-
tion. Twist clockwise to reset.
I.
FAULT Indicator: Illuminates if an operation
fault occurs. Reset by turning spindle speed
dial to "0", or by pressing E-Stop button.
J.
. Press to scroll screen right.
K.
. Press to return to previous screen, and
to return to main X/Y/Z-axis display screen.
L.
. Press to select parameter within SET
screen.
M.
. Press to open user-adjustable DRO
system parameters. Use arrow keys (B, C,
D, J, K) to select or change parameter. DRO
resolution can be set in inches or millimeters
with values of 0.0001 to 1.0000.
Model G0836 (Mfd. Since 09/17)
Advertisement
Table of Contents
