Table of Contents
Advertisement
H2939—4 pc. Edge Finder Set
This is a must have set for any shop. 4 different
styles to cover any setup problem! Set includes 1
⁄
" diameter with point,
each:
3
8
with a point and .200" shoulder,
point and
⁄
" dia. with .200" shoulder.
1
2
Figure 49. H2939 4 Pc. Edge Finder Set.
G9849—Magnetic Base/Dial Indicator Combo
Precision measurements and set-ups have never
been so easy. Magnetic base engages with just
the turn of a switch and allows pinpoint adjust-
ment. The dial indicator features 0-1" travel and
has a resolution of 0.001". This fine set includes a
molded case for protection and convenience.
Figure 50. G9849 Magnetic Base/Dial Indicator
Combo.
order online at
Model G0836 (Mfd. Since 09/17)
⁄
" dia. combination
3
8
⁄
" dia. with a
1
2
www.grizzly.com
T25615—Milling for Home Machinists
Milling for Home Machinists is a project-based
course book that provides a complete introduction
to milling and the use of the milling machine. It
assumes no prior knowledge and works through
the process of using a home shop mill from begin-
ning to end.
Figure 51. T25615 Milling for Home Machinists.
H2861—Face Mill
G4051—Carbide Insert for Flycutter
G1646—R8 Collet Set of 12
This 2
/
" Fly Cutter accepts four carbide inserts
1
2
(not included). Comes with an R8 arbor.
Figure 52. H2861 Face Mill.
Figure ??. H2861 Face Mill.
1-800-523-4777
or call
-33-
Advertisement
Table of Contents
