Table of Contents
Advertisement
2.4 Setup level
This level enables you to configure and parameterize the compact controller. You can enter the
setup level from the operating level by pressing the enter key once. Here, you may adapt preset
functions to your specific needs (configure) and change parameters. The functions are ar-
ranged in nine main groups:
4
PAR
(control parameters)
4
N
I
(input functions)
4
SETP
(reference variable)
4
CNTR
(control structure and functions)
4
OUT
(output functions)
4
ALRM
(alarm functions)
4
AUX
(additional functions)
4
TUNE
(start-up adaption)
4
I-O
(view process data)
The parameters are always connected to the function they are assigned to.
This means that pressing
particular function you have chosen.
Appendix A lists all functions and parameters provided by the compact controller. The table in-
cludes the main groups and their functions with the setting options in the left column, and the as-
sociated parameters in the right column. This table will considerably facilitate learning how to
operate the controller. You only have to keep the following in mind:
To move from left to right (in columns), press
To move in the reverse direction (from right to left), use the return key
The key number (KEY) must be entered in setup level only when a function or parameter is
changed for the first time.
The right column of the table, i.e. the parameters, can be accessed by pressing the selector key
. Again, press the enter key to move forward in columns.
To move in rows from top to bottom, press
To move in reverse direction, press
An example in section 2.6 illustrates how to configure and parameterize the controller prop-
erly.
Note!
The display changes from setup level to operating level after 5 minutes when no key is pres-
sed!
allows you to access only the parameters that are relevant for the
.
. Confirm new settings or the new value by pressing
.
Operation
.
.
9
EB 6493-1 EN
Hide quick links:
Advertisement
Table of Contents
