Lim1 Limit Relay L1; Lim2 Limit Relay L2 - Samson Trovis 6493 Mounting And Operating Instructions

Functions of the compact controller

3.6.1 LIM1 Limit relay L1

The function of the limit relays has been described in the previous section 3.6.
Note!
Functions of the two-step or three-step output C.OUT (see section 3.5.10) and functions of
the binary outputs B.OUT (see section 3.5.11) have priority over the settings of the functions
LIM1 and LIM2.
Choose between:
Limit relay L1
oFF L1 Limit relay L1 deactivated
g
Lo L1.X
g
Hi L1.X
g
Lo L1.WE
g
Hi L1.WE
g
Lo L1.YP
g
Hi L1.YP
g
Lo L1.XD
g
Hi L1.XD
g
AbS L1.XD
g
Parameters to be set
LI.X Limit for X, as absolute value
LI.WE Limit for WE, as absolute value
LI.YP Limit for Y
LI.XD Limit for XD in %
L.HYS Differential gap in % based on measuring range

3.6.2 LIM2 Limit relay L2

This function enables you to define the functions of limit relay L2, described in section 3.6.
Note!
Functions of the two-step or three-step output C.OUT (see section 3.5.10) and functions of
the binary outputs B.OUT (see section 3.5.11) have priority over the settings of the functions
LIM1 and LIM2.
52
EB 6493-1 EN
~ L1 activated when LI.X is not reached
~ L1 activated when LI.X is exceeded
~ L1 activated when LI.WE is not reached
~ L1 activated when LI.WE is exceeded
~ L1 activated when LI.YP is not reached
~ L1 activated when LI.YP is exceeded
~ L1 activated when LI.XD is not reached
~ L1 activated when LI.XD is exceeded
~ L1 activated when the value of LI.XD is exceeded
in %
PID