St.in Resetting To Factory Defaults; Keyl Operator Keys; View Setting Of Display Contrast - Samson Trovis 6493 Mounting And Operating Instructions

Functions of the compact controller

3.7.2 ST.IN Resetting to factory defaults

This function enables you to reset all settings for parameters, functions and calibrating values
together or individually:
FrEE INIT
g
All INIT
g
FUnC INIT
g
PArA INIT
g
AdJ INIT
g
To reset to factory default, proceed as follows:
You are in the main group AUX and have selected ST.IN.
1. Press the enter key. FrEE INIT appears on the display.
2. Use the cursor keys to select from the above listed settings (All, FUnC,PArA or AdJ).
3. Press the enter key. Selected settings are reset to factory defaults. When resetting is com-
pleted, FrEE INIT is displayed again.

3.7.3 KEYL Operator keys

This function enables you to switch the function of the six keys via the binary input on and off, or
to disable the selector key, the manual/automatic key or the cursor keys.
oFF LOCK
g
bi1 LOCK
g
on noH.W
g
Note! Several functions can be assigned to the binary input!

3.7.4 VIEW Setting of display contrast

This function enables you to modify the display contrast from grade 1 to 10. This allows opti-
mum display illumination at the site of installation. 1 is especially suitable for installation on
high places, whereas 10 suits low places of installation.
Choose between:
1 VIEW Contrast setting 1
g
to
10 VIEW Contrast setting 10
g
54
EB 6493-1 EN
Resetting deactivated/completed
Resetting all the functions, parameters and the key number
Resetting all the functions
Resetting all the parameters and the key number
Basic initialization of the calibrating values for In1, In2 and Y1
Operator keys enabled
Enable/disable all keys via the binary input BI1
Selector key, manual/automatic key and cursor keys disabled.
The compact controller remains in the operating mode effective
before you activated this function.