1. Undo the height adjustment Allen screws (1).
2. Set the trunk support to the required height.
3. Retighten the screws.
5.14.3 Adjusting the depth
Tools:
•
5 mm Allen key
1529686-U
1. Open the zip.
2. Undo the screws (1) for the depth adjustment.
3. Adjust the trunk support to the required position.
4. Retighten the screws.
5. Close the zip again.
5.15 Adjusting and removing the tray
CAUTION!
Risk of injury or material damage if a mobility
device which is fitted with a tray is transported
in a vehicle
– If a tray is fitted, always remove it before
transporting the mobility device.
5.15.1 Laterally adjusting the tray
1. Loosen wing-screw (1).
2. Adjust tray towards the left or right.
3. Re-tighten wing-screw.
Setup
63