Adjusting The Remote For The Length Of The User's; Arm; Adjusting The Height Of The Remote (Only For Swing-Away Remote Supports); Adjusting Remote Offset - Invacare Storm 4 Series User Manual

5.2.1 Adjusting the remote for the length of the user's

arm

1. Loosen wing bolt A.
2. Shift the remote forwards or backwards to the desired
distance.
3. Retighten the bolt.
5.2.2 Adjusting the height of the remote (only for
swing–away remote supports)
• 6 mm Allen key
1. Loosen Allen screw A.
2. Adjust remote to desired height.
3. Re-tighten Allen screw.
1529686-U

5.2.3 Adjusting remote offset

The remote can be adjusted in steps of 0.8 mm (20 mm)
sidewise.
• 3 mm Allen key
1. Loosen Allen screws A.
2. Adjust remote to desired offset.
3. Re-tighten Allen screws.
Fig. 5-1
Setup
33