1. Loosen clamping lever A.
2. Adjust height of linkage switch.
3. Tighten clamping lever.
5.8 Adjusting Swing-Away Mechanism
CAUTION!
Risk of Injury and Damage
Remaining burrs and missing end caps after
modifications on rods, such as shortened rod, can
lead to injury or damage.
– Deburr cut after cutting excessive length.
– Re-install end cap after deburring.
The swing-away mechanism can be used for different
options such as:
•
PROTON wings of head array
•
Extremity control joystick for chin control
•
Egg switch
•
5/32" (4 mm) Allen key
1529686-U
Adjusting Depth
1. Loosen screw A.
2. Adjust rod to desired depth.
3. Tighten screw.
Adjusting Position
The swing-away mechanism can be turned through 360
degrees.
1. Loosen screw A.
2. Adjust to desired position.
3. Tighten screw.
Setup
45