Clearing and Adjusting the Printer
Adjusting the Image Density
Adjust the image density when the
print side of the page is a hazy gray or
the print image looks patchy.
Important
2
❒ Extreme settings may create out-
put that appears dirty.
❒ Image density settings should be
made from the application or the
printer driver whenever possible.
Note
❒ Changing the image density set-
ting might cause a deterioration of
color balance. We recommend that
you leave the image density at its
factory default setting.
A
Press { { { { Menu} } } } .
On Line
Menu
Job Reset
Form Feed
"Menu" appears on the panel dis-
play.
B
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display
"Maintenance", and then press
{ { { { Enter} } } } .
Menu:
Maintenance
42
Escape
#
Enter
Power
Error
Data In
ZDJS001N
C
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "Im-
age Density", and then press { { { { En-
ter} } } } .
Maintenance:
Image Density
D
Press { { { { U U U U } } } } or { { { { T T T T } } } } to select the col-
or you want to adjust, and then
press { { { { Enter} } } } .
Image Density:
Black
E
Press { { { { U U U U } } } } or { { { { T T T T } } } } to set the image
density value, and then press { { { { En-
ter} } } } .
Black:
(-3 +3)
Note
❒ You can adjust the image densi-
ty in seven steps from -3 to +3.
Increasing the value makes the
printouts darker and decreasing
the value makes the printouts
lighter.
To adjust another color, repeat step
D
E
and
.
F
Press { { { { On Line} } } } .
"Ready " appears on the panel dis-
play.
Ready
0
0