Image Quality & Color Management Features - Savin CLP37DN Manual

Image Quality & Color Simulation Features
For creative users requiring color accuracy in their output, the Savin CLP37DN/CLP42DN supports a number of
image enhancement and color simulation standards to ensure color output matches the desired outcome for
quality and/or proofing purposes.
High Resolution up to 1200 x 1200 dpi
The Savin CLP37DN/CLP42DN delivers
Savin CLP42DN PS Properties
superior image quality at full rated
engine speeds of 37-ppm or 42-ppm for
both full-color and black & white pages
(Letter) at resolutions of 600 x 600 dpi
(1-bit/Fast mode) and 600 x 600 dpi (2-
bit/Standard Mode). The 600 x 600 dpi
(2-bit/Standard) setting is the default
quality mode for the printer.
The Savin CLP37DN/CLP42DN is also
capable of printing at an enhanced
resolution of true 1200 x 1200 dpi (1-bit)
mode for documents requiring the
highest level of image quality.
Note: 1200 x 1200 dpi printing reduces output speed to about 15-ppm (Letter) for both engines in simplex
and duplex print modes. This is due to the additional data processing load.
B&W Page Detect
Within the System Menu users can select the B&W Page Detect function. Also known as Auto Color Sensing
(ACS), when black or monochrome output is selected only the appropriate toner cartridges and photoconductor
units are engaged, conserving supplies and creating prints at the lowest possible cost-per-page. This feature
automatically
switches back and
forth between the
proper imaging
units for mixed
color and
monochrome
pages within the
same job.
72