Replacing the Waste Toner Bottle
If "Replace Waste Toner (Type E)" ap-
pears on the panel display, replace
the waste toner bottle.
Replace Waste
Toner (Type E)
A
Turn off the power switch and
unplug the power cable.
B
Open the front cover slowly by
pulling down from the two areas
on the left and right.
C
Take out a new waste toner bottle
from the bag.
D
Remove the used waste toner bot-
tle slowly from inside the printer.
Important
❒ Be sure to remove the waste
toner bottle in a level manner.
E
Remove the lid (A A A A ), and then put
it on the position shown in the il-
lustration (B B B B ).
ZDJH007J
F
Put the used waste toner bottle
into the bag that contained the
new waste toner bottle, and then
seal the bag.
ZDJH228J
Important
❒ Be sure to handle the bottle
carefully so the waste toner
does not spill.
Replacing the Waste Toner Bottle
1
ZDJH802J
ZDJH229J
25