Manual Adjust - Savin SLP 38c SLP38C SLP38C Maintenance Manual

Clearing and Adjusting the Printer
Note
❒ The current resolution is dis-
played on the printer driver
properties.
❒ To adjust the color registration
on thick paper, select "Thick:
600dpi" regardless of the cur-
2
rent resolution.
H
Confirm that the following mes-
sage is displayed, and then press
{ { { { Enter} } } } .
Press # for Test
Print (Bypass)
The following message appears on
the panel display. The size of the
paper loaded in step
Set Sheet, then#
A3 (297 X 420)
I
Confirm that A4L
is in the Bypass Tray, and then
press { { { { Enter} } } } .
The Test Sheet is printed. See P.40
"Test Sheet Samples"
J
Press { { { { U U U U } } } } or { { { { T T T T } } } } to make the off-
set settings, and then press { { { { En-
ter} } } } .
When such a clear (not smeared in
red) square as the sample is:
• at its center position, select "0".
• shifted to the left, select "-1".
• shifted to the right, select "+1".
Select Action:
0: Exit
Select Action:
-1: Re-adjust
Select Action:
+1: Re-adjust
38
A
is shown.
L or larger paper
L L
If you select "0: Exit", the printer re-
turns to the previous menu.
If you select "-1" or "+1", the printer
H
returns to step
until "0" is available.
K
Press { { { { On Line} } } } .
"Ready " appears on the panel dis-
play.
Ready

Manual Adjust

Important
❒ Normally, do not perform manual
color adjustment.
A
Press { { { { Menu} } } } .
On Line Menu
Job Reset Form Feed
Power Error
"Menu" appears on the panel dis-
play.
B
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "Main-
tenance", and then press { { { { Enter} } } } .
Menu:
Maintenance
The maintenance menu is dis-
played.
C
Press { { { { U U U U } } } } or { { { { T T T T } } } } to display "Col-
or Regist.", and then press { { { { Enter} } } } .
Maintenance:
Color Regist.
. Keep adjusting
Escape
#
Enter
Data In
ZDJS001N