Original Orientation And Scan Area; For E-Mail, Scan To Folder, And A Network Delivery Scanner - Ricoh 2238c Operating Instructions Manual

Original Orientation and Scan Area

To correctly display the top/bottom
orientation of a scanned original on a
client computer, original orientation
and page flow must be set when plac-
ing the original.
When using the e-mail function, the
Scan to Folder function, the Docu-
ment Server function, and the net-
work delivery scanner function,
settings are made on the control panel
of the machine. When using the ma-
chine as a network TWAIN scanner,
settings are made with the TWAIN
driver.
Note
❒ The difference between scanning
with the TWAIN scanner function
and the e-mail function, the Scan to
Folder function, the Document
Server function, or the network de-
livery scanner function is shown in
the following table:
TWAIN
Scanner
A whole batch
of originals is
scanned using
the size of the
first original.
For E-mail, Scan to Folder, and
E-mail/Scan to
Folder/Document
a Network Delivery Scanner
Server/Network
Delivery Scanner
A A A A
Auto detection
is used to deter-
mine the size of
each original
placed on the
exposure glass.
A whole batch
of originals set
in the ADF will
be scanned by
the maximum
size original.
Original Orientation and Scan Area
TWAIN
Scanner
Auto detection is used to deter-
mine the size of each original.
When an original is smaller than
the specified size, a blank space ap-
pears in the resulting image.
Make settings for one-sided/two-
sided combination.
Note
❒ The defaults can be changed us-
ing [Original Setting] of Scanner
Features. See p.14 "Scan Set-
tings".
E-mail/Scan to
Folder/Document
Server/Network
Delivery Scanner
39
3