Clear Card Memory - SATO M-5900RV Operator And Technical Reference Manual

Section 4. Programming Reference
Command Structure
<ESC>*a,bb
a = Memory card section to be cleared
G
P
F
O
bb =
Example:
Placement:
Default:
Command Function
To clear individual memory areas in the Memory Card.
Printer Input
<ESC>A
<ESC>CC1<ESC>*O,09
<ESC> Z
Printer Output
There is no printer output as a result of his command.
Special Notes
1. To clear everything in the memory card, use the <ESC>BJF Memory
Card Initialize command (dee Page 4-94).
2. This command is ignored if there is no data to be cleared.
3. This command is ignored if a memory card is not installed in the printer.
Page 4-82
Memory Card Function

Clear Card Memory

To clear SATO graphics files from memory card
To clear PCX graphics files
To clear formats from the memory card
To clear TrueType fonts
Memory Card storage area to be cleared
01 to 99 for Graphics, PCX or Formats
00 to 99 for TrueType fonts
<ESC>*G,01
This command should be sent to the printer immediately
following the <ESC>CC Slot Select command.
None
SATO M-5900RV Operator and Technical Reference Manual
PN 9001081
Rev. C