SATO M-5900RV Operator And Technical Reference Manual page 139

Rotate, Moving Base Reference Point
Special Notes
PN 9001081
Rev. C
1. Do not combine this command and the <ESC>% Rotate command
(see Page 4-70) in the same data stream.
2. A custom graphic is not afftected by this command. Therefore always
design and locate your graphic image to print in the appropriate
orientation.
3. See Section 4, Rotated Fields, Page 4-10 for more information.
4. The specified values are valid until another Rotate (<ESC>R)
command is received.
5. Receipt of a Stop Print (<ESC>Z) command will reset the setting to
the default value.
SATO M-5900RV Operator and Technical Reference Manual
Section 4. Programming Reference
Page 4-73