SATO M-5900RV Operator And Technical Reference Manual page 251

Download Procedure (Cont)
Example:
Command Structure
Command Function
Printer Input
PN 9001081
Rev. C
<ESC>LD,a,b,c,d,e,f,g,h,i
a = Replacement character for STX in ASCII or hex format
b = Replacement character for ETX in ASCII or hex format
c = Replacement character for ESC in ASCII or hex format
d = Replacement character for ENQ in ASCII or hex format
e = Replacement character for CAN in ASCII or hex format
f = Replacement character for NULL in ASCII or hex format
g = Replacement character for OFFLINE in ASCII or hex format
h = Auto-Online. Printer powers up in the Online mode.
0 = Yes
1 = No
i = Zero Slash. Places a slash through the "0" character.
0 = Yes
1 = No
Example: <ESC>LD,{,},%,#,&,*,~,0,0
Placement: Immediately following the <ESC>A Start command and in an independent
data stream.
Default: Standard Protocol command codes
Allows the user to define custom Protocol Command codes.
Allows the user to define custom Protocol Command codes.
{^A^LD,{,},%,#,&,*,~,0,0^Z}
SATO M-5900RV Operator and Technical Reference Manual
Appendix E. Custom Protocol Command Codes
.EED
(Next Page)
.EED
Page E-3