SATO M-5900RV Operator And Technical Reference Manual page 141

Printer Output
Special Notes
PN 9001081
Rev. C
Sequential Numbering
1. The value specified for Print Quantity (see Page 4-63) should be equal to
the number of different sequential values desired multiplied by the number
of repeats specified.
Example:
To print 2 sets each of the numbers 1001-1025 on separate labels, we
need 50 total labels. The commands would be as follows:
<ESC>A
<ESC>H0100<ESC>V0100<ESC>F002+001<ESC>XM1001
<ESC>Q50
<ESC>Z
2. It is necessary to specify the print position for each sequential field on a
label.
3. Up to eight different sequential fields can be specified per label.
4. This command ignores alpha characters in the sequential number field.
5. This command cannot be used with the following commands:
Copy Image, Page 4-33
Reverse Image, Page 4-68
Line Feed, Page 4-52
SATO M-5900RV Operator and Technical Reference Manual
Section 4. Programming Reference
Page 4-75