Proper Care Of The Scanner - Denso GT10Q-SR Operator's Manual

• If the interface cable is damaged (e.g., exposed or broken lead wires),
stop using it and contact your nearest dealer.
Failure to do so could result in a fire or electrical shock.
• Do not drop the scanner.
The scanner housing may be broken, creating injuries.
Using the scanner whose housing is broken could result in smoke or fire.
Unplug the AC adapter from the wall socket and contact your nearest
dealer.

Proper Care of the Scanner

Dust or dirt accumulating on the clear plate of the code reading window will affect reading
performance. If you use the scanner in dusty areas, therefore, periodically check the clear plate
of the QR-code reading window and clean it if dusty.
• To clean the plate, first blow the dust away with an air brush. Then wipe the plate with a
cotton swab or the similar soft one gently.
• If sand or hard particles have accumulated, never rub the plate; doing so will scratch or
damage it. Blow the particles away with an air brush or a soft brush.
Limited Warranty on Software Products
In no event will DENSO WAVE be liable for direct, indirect, special, incidental, or
consequential damages (including imaginary profits or damages resulting from interruption of
operation or loss of business information) resulting from any defect in the software or its
documentation or resulting from inability to apply the software or its documentation.
vi