Table of Contents
Advertisement
Extended operation
Check firmware version in dictation microphone (see section
►
"Settings in system menu").
If a new firmware version for Digta CordEx is available online,
►
download the corresponding file onto the PC.
Keep paging button [5] on docking station [2] pressed down for
►
several seconds.
Now the Digta CordEx registers itself for data transfer at the
PC and is assigned with a separate drive letter.
Copy the new firmware file "CordEx.hex" to the Digta CordEx
►
drive.
The dictation microphone shows the progress of the update in
display [17].
After successful transfer, the dictation microphone is rebooted.
Installation of firmware update is now complete and dictation
microphone is ready.
Settings in system menu
The dictation microphone features a system menu for internal
settings.
2
Accessing system menu
Briefly press On/Off button [8] on dictation microphone [1] until
►
the text Menu appears at bottom left of display text.
Press blue button Menu [10].
►
The system menu consists of the following menu items:
Connection
■
Start pairing
Stop pairing
Connects the dictation microphone to a docking station or discon-
nects an existing connection. This function is required for multiple
device operation (see section "Operating several dictation micro-
phone/docking stations").
Version/Info
■
Serial no.
FW/Urloader
Display of serial number and firmware version. This function is
required for firmware update (see section "Installing firmware
update").
Advertisement
Table of Contents
