Setting Up Function Buttons; Controlling Dictation Microphone Via Foot Control; Connecting Foot Control - Grundig Digta CordEx Operating Manual

Extended operation
Remove already existing battery or USB adapter from dock-
►
ing station.
Insert battery to be charged completely into receiver of docking
►
station in reverse direction of arrow.
The orange LED indicates that battery is being charged. When
LED goes out, the battery is completely charged.
The battery on the docking station is only charged if dic-
d
tation microphone is not located in docking station. Other-
wise the battery in dictation microphone is charged first.
The charging process does not start immediately, rather
after several minutes.
22

Setting up function buttons

Function buttons F1 to F3 [11-13] can be assigned with spe-
cial functions. Set-up is performed via software AdapterServer.
Depending on applied dictation software, assignment of function
buttons can vary.
For additional set-up information, see operating instruc-
d
tions of dictation software.

Controlling dictation microphone via foot control

The dictation microphone can be operated by means of a foot
control (optionally available). This allows the control of dictation
microphone functions without the use of hands.

Connecting foot control

Plug connection cable of foot control into the provided connec-
►
tion jack [23] on back of docking station.