Charging Battery; Switching On Dictation Microphone - Grundig Digta CordEx Operating Manual

Hide thumbs Also See for Digta CordEx:
Table of Contents

Advertisement

Start-up

Charging battery

Danger of explosion and burns!
Recharge the batteries only with the docking station or in
the dictation microphone.
Do not use damaged batteries.
Disregarding these precautions means risking explosions
and burns.
The battery has to be attached to the receiver of the dictation
microphone and must be charged for start-up. Alternatively the
dictation microphone can be supplied with power by means of a
special USB adapter (see section "Connecting dictation micro-
phone directly to PC").
Push battery into receiver on back of dictation microphone in
direction of arrow until it snaps into place.
14
WARNING
Place dictation microphone [1] into docking station [2].
The orange LED [4] indicates that battery is being charged.
When LED goes out, the battery is completely charged.
The charging process does not start immediately, rather
d
after several minutes.

Switching on dictation microphone

Press On/Off button [8] on right side of dictation microphone
[1] and hold until company logo appears in display [17].
On docking station [2] the green LED [3] signals the successful
registration of the dictation microphone at docking station by
continuous illumination.

Advertisement

Table of Contents
loading

Table of Contents