Using Foot Control; Connecting Barcode/Rfid Reader - Grundig Digta CordEx Operating Manual

Using foot control

The foot control assumes the following functions:
Left pedal
■
(REW)
i
To rewind the dictation, press the pedal.
►
Middle pedal
■
(REC)
g
To create a new dictation, press the pedal down and wait until
►
the dictation software starts a new dictation.
To switch to recording mode, press the pedal briefly. To start/
►
pause recording and playback, press the pedal briefly.
Depending on applied dictation software, function of the
d
foot control can vary.
Right pedal
■
(STOP)
e
■
(PLAY)
f
To start/pause recording and playback, press the pedal briefly.
►

Connecting barcode/RFID reader

The dictation microphone is designed for connection of a barcode
or RFID reader. This allows identification of dictations by a code.
For connection, the existing cover strip must be replaced. The
device is equipped with a special cover strip that leaves the con-
nection slot for accessory devices open and supports the barcode/
RFID reader.
Extended operation
23