Displaying Recorded Data In Graph - T&D RTR-57C User Manual

Displaying Recorded Data in Graph

1.
In the Main Menu, open [DATA LIST] or press the [List] button on
the main unit to view the data list.
2.
Select the data you wish to view from the data selection display.
3.
Click [Display Graph]
In the case of event list data, click [Event List]
●
3.
The graph or event list will appear.
CH1
OK
《Graph Display》
49
《Event List Display》
【Viewing a data list】
Data Number (No. 7 of 7)
The most recently downloaded data will be on top.
Unregistered data loggers will appear by channel name.
●
If a channel name shows [......].
●
This means that when the recording conditions were set via direct cable
connection between the data logger and the computer the channel name
was entered using two byte code
Only the first 6 letters of group and remote names will be displayed.
●
Device Name Downloaded date
・RTR51 08 ／ 10
G R O U P 2 S a m p l e
Group Name / Remote Unit Name
(If the data logger has been registered)
50