Downloading Recorded Data - T&D RTR-57C User Manual

5.
Connect the data logger to the RTR-57C and press the operation
dial to have the settings transmitted.
〔For RTR-51/52/53,RVR-52 and TR-51A/52〕
Place logger face down on RTR-57C
〔For TR-71S/72S〕
6.
Once transmission has been completed, a message will appear
on the display telling you communication was completed
successfully. By pressing the operation dial you can go back to
the Recording Settings Menu Display.
The Remote Unit(s) will be put on Record Standby.
33
If light enters during communication,
●
an error will occur. Please make
sure to place the unit within the
ridges for an exact fit.
Connect using the included
communication cable (TR-3C10)
Cable Communication:
Download Recorded Data
Download recorded data by connecting the data logger to
the RTR-57C.
1.
Connect the data logger to the RTR-57C.
〔For RTR-51/52/53,RVR-52 and TR-51A/52〕
Place logger face down on RTR-57C
〔For TR-71S/72S〕
2.
In the Main Menu, open [GATHER DATA] and downloading will
start.
If light enters during communication,
●
an error will occur. Please make
sure to place the unit within the
ridges for an exact fit.
Connect using the included
communication cable (TR-3C10)
34