T&D RTR-57C User Manual page 17

4.
After having completed the settings, adjust the arrow (>) to [REC
Programmed] and press dial.
5.
After having set the desired recording start date and time, adjust
the arrow (>) to [REC SETTINGS] and press the dial to transmit
the info.
6.
Once transmission has been completed, a message will appear
on the display telling you communication was completed
successfully. By pressing the operation dial you can go back to
the Recording Settings Menu Display.
The Remote Unit(s) will be put on Record Standby.
23
◆ About Forbidding Recording Start by Wireless
If a selected Remote Unit has been set to only start recording via computer
●
and has been to set to be protected against changes in the recording start
via wireless communication, the following message will appear.
When starting recording by Group, a list will appear showing the Remote
●
Units with which communication occurred.
[PROT] will appear next to those Remote Units which have been set to only
start recording via computer and have been set to be protected against
changes in recording conditions via wireless communication.
【How to Lift the Protection】
For details about how to lift the protection see the Help Menu in the provided
software『T&D Recorder for Windows 』or see its User's Manual.
◆ About Reading the Recording Settings
Select a Remote Unit and press on [Read Settings] in the REC SETTINGS
Menu. After reading, the recording settings information for the selected
Remote Unit will be displayed.
NOTE: If you select a Group, this reading of settings cannot be done.
◆ About the Default Settings
At any time, you can return the RTR-57C to its default settings of Recording
Mode: Endless and Recording Interval: 10 minutes.
24